| Cases and Enclosures |
|
The FlashcatUSB case fits all Professional (PCB 5.1) and Classic (2.4) that use USB Type-C. This is a high-quality,
three-piece injection molded enclosure.
|
|
| High-speed SPI Isolator |
|
This accessory provides full galvanic isolation between FlashcatUSB and a SPI Flash device or SPI bus.
This adapter provides both voltage and signal isolations and can be used with any of the
FlashcatUSB family of programmers. In addition, this product also offers a SPI level shifting
solution. For example, FlashcatUSB Classic can use this device to read/write to 1.8V SPI memories.
Note: only standard SPI signals (MOSI, MISO, CLK, CS#) are supported.
High-speed SPI Isolation:
- 1.8V Output: 16MHz max clock frequency
- 3.3V Output: 24MHz max clock frequency
DC-DC Transformer capabilities:
- 5V input to 5V or 3V output: 200mA available current
- 3V input to 3V output: 75mA available current
- 5V or 3V input to 1.8V output: 100mA available current
Specifications:
- Input Voltage: 3V or 5V compatible
- Selectable level-shifting: 1.8V / 3V / 5V output DC and SPI signals
- DC Voltage Isolation: 2.5kVRMS
- SPI Signal Isolation: 3.75kVRMS
|
|
| MACH1 Current Sense |
|
This adapter board can be used with an oscilloscope to calculate or monitor the current of a memory device under test.
Two MCX connectors provide seperate measurements for the VCC and VIO supplies.
|
|
|
